回上一頁

[供應] 節能自在舒適床墊技術

2012-02-14
技術關鍵字:●日用品 |

  技術說明:
匈牙利中小企業已開發出一種新的床墊,能夠取代傳統座椅和床墊,使用革新性的舒適泡沫製造。客戶端在尋找有興趣的授權夥伴。

技術成熟度:
雛型

技術規格:
EFC的床墊式創新而能夠取代傳統的座椅、床墊和舒適性發泡生產的產品。EFC的床墊硬度可以通過載荷管制,可以設置需要的壓力在終端氣閥壓縮處(這是放置在床墊底部)。EFC的床墊,在終止加載後的表現類似於傳統座椅、座墊,他會回覆成其原來的形狀,不需要外部能源。
密封的被封閉入紡織品發泡材質的承載能力可分為兩部分組成:
1.發泡材質的承載能力(它的原理類似市場上傳統產品,他提供舒適感,在此情況下他是唯一主要部分。
2.包圍在發泡材質周遭的空氣孔洞,也被轉換用來負擔承載,壓力可以用閥門調整。
3.根據調節閥的調整,床墊的負擔由空氣孔洞與發泡材質共同承擔。
4. 舒適感覺的調整藉由調整氣壓做處理。

技術競爭力分析:
主要的好處:
在與傳統的不足之處相比之下(上述)座椅、座墊和EFC的床墊:
1. 不需要外在能源
2. 調整或設置壓力(硬度)是由設備解決,並且掩藏入床墊中,不用干擾舒適感
3. 使用永續性的發泡材料,可重新充氣,並可能重新調整其硬度(填充不需要外部能源資源)
4. 可以調整其壓力,也可以回到最初調整前的值,舒適感是可以被重現的。
5. 無噪音
6. 無需機械來做調整
7. 個人化舒適感的需求(如:床、床墊),可分兩部分做調整,依個人、舒適度的需求、生病情況下也可以不同。
8. 家具耐久性長。
9.製造是非常經濟的,因為床墊節省了家具結構的成本,並且減少應用發泡素材。
10.他是不易察覺到失敗的,因為在失敗的情況下,家具不會不能再用,只有兩端可以做舒適性調整,成為類似傳統、柔軟舒適、高檔的床墊或家具。

適用產業:
1.家庭座椅和床家具製造業
2.旅行車屋
3.住院病人醫療護理的床

專利保護狀況
已獲得
匈牙利
PCT/HU 2010/000031
PCT/HU 2009/000089)

Energy free comfort mattress

Brief description:
Our partner, a Hungarian SME has developed a new kind of mattress which is able to replace the conventional seat- and bed mattresses and revolutionizes comfort foam-manufacturing. The client is interested in finding license partners.
Maturity of technology:prototype
Technology spec:
The EFC mattress is a product which is able to replace the conventional seat- and bed mattresses and revolutionizes comfort foam-manufacturing. The hardness of EFC mattress can be controlled by loading, the required pressure can be set with the terminal-valve (which is placed on the bottom of the mattress) at compression. At ending the loading the EFC mattress behaves similar to the conventional seat-mattresses, it assumes its original shape without external energy needs.
The carrying-capacity of the foam material which is hermetically closed into the textile can be divided between two components:
1.The carrying capacity of the foam material (it works similar to other conventional products which are on the market, but in that case this is the only component which provides comfort)
2.The air-cell, which surrounds the foam material is converted to a component also carrying the burden, for which pressure can be adjusted with a valve
3.According to the adjustment of the valve, the burden of the mattress can be divided between the air-cell and the foam material
4.The adjustment of the comfort sense is managed by adjusting the air-pressure
Advantages:
Main advantages:
In contrast with the deficiencies (mentioned above) of the conventional seat-mattresses the EFC mattress:
1.Does not need external energy source
2.Adjusting/setting the pressure (and through hardness) is solved by devices, which are built and hidden into the mattress without disturbing comfort
3.Using the resiliency of foam charge materials its refills the air-cell and makes possible the re-adjustment of the hardness (the refill does not need external energy resource)
4.The pressure can be set, it sets back to the value adjusted before, the comfort-sense is reproducible
5.No noise effect
6.No need of mechanical intervention for adjustment
7.Personal comfort needs are feasible (for example, the bed-mattress can be divided and it the two parts can be adjusted to individual needs, in case of illness the comfort need can also be different)
8.The damage of the drape of the furniture is less (the pitting of the furniture is off or elongates is time), the durability of the furniture progresses
9.According to the principle of cost neutrality, the manufacturing is very economic, because the payups of the mattress are covered by the savings offered by the simplification of the structural build-up of the furniture and by the application of foams with less strength
10.It is insensible to failures, because in case of failure, the furniture does not become unusable, only to adjustability of the comfort ends, and it becomes a conventional, soft comfort grade mattress or furniture.
Potential industry:
1.Household seat- and bed furniture manufacturing
2.Bedchambers of vehicles
3.Beds for in-patient medical attendance
Patent Status(obtained):Hungary
Issued no:PCT/HU 2010/000031
PCT/HU 2009/000089)




若您對此供需有興趣,歡迎來信至 service@e-sinew.com,謝謝您^^

內容 留言者 留言時間
我認為這個材質的做法可以適應在個性化、小空間的家具使用。最典型的就是旅行車房。 黃怡菁 2012-02-21
推薦技術 植物提取物對惡性黑色素瘤和乳腺癌表淺病灶之局部治療
觀看技術摘要
推薦需求 尋求可維持健康體重的功能或食品成份
觀看需求摘要
 會員登入
帳號
密碼
  加入會員-- (請先閱讀平台使用說明)
 技術供需提供單位
台灣智慧財產管理制度(TIPS)介紹
技術交易平台剖析